Computational study on the interactions of mustard gas with cucurbituril macrocycles

The study on the absorption of toxic gases such as mustard gas by organic host is essential to the development of inexpensive detection and decontamination equipments. Using quantum chemical methods, we propose cucurbituril as an effective host to capture mustard gas. It was found that stable complexes are formed with the inclusion of the toxic gas molecules inside the cucurbituril cavity, compared with the lateral and exterior interactions. Oxygen mustard has a comparable binding energy with sulfur mustard and hence can be used during experimental investigation. Additionally, during the inclusion complex formation, the presence of heteroatoms helps the guest molecules to undergo a larger structural reorganization to get accommodated inside the cucurbituril macromolecule. Atoms‐in‐molecules analysis shows the existence of strong intermolecular CH…O bonding between the guest molecules and cucurbituril macromolecule. The presence of an intramolecular CH…Cl type of bonding accounts for the higher stabilization of sulfur mustard inside the cucurbituril macromolecule. © 2015 Wiley Periodicals, Inc.     

Method development for the determination of 24S‐hydroxycholesterol in human plasma without derivatization by high‐performance liquid chromatography with tandem mass spectrometry in atmospheric pressure chemical ionization mode

We developed a highly sensitive and specific high‐performance liquid chromatography with tandem mass spectrometry method with an atmospheric pressure chemical ionization interface to determine 24S‐hydroxycholesterol, a major metabolite of cholesterol formed by cytochrome P450 family 46A1, in human plasma without any derivatization step. Phosphate buffered saline including 1% Tween 80 was used as the surrogate matrix for preparation of calibration curves and quality control samples. The saponification process to convert esterified 24S‐hydroxycholesterol to free sterols was optimized, followed by liquid–liquid extraction using hexane. Chromatographic separation of 24S‐hydroxycholesterol from other isobaric endogenous oxysterols was successfully achieved with gradient mobile phase comprised of 0.1% propionic acid and acetonitrile using L‐column2 ODS (2 μm, 2.1 mm id × 150 mm). This assay was capable of determining 24S‐hydroxycholesterol in human plasma (200 μL) ranging from 1 to 100 ng/mL with acceptable intra‐ and inter‐day precision and accuracy. The potential risk of in vitro formation of 24S‐hydroxycholesterol by oxidation from endogenous cholesterol in human plasma was found to be negligible. The stability of 24S‐hydroxycholesterol in relevant solvents and human plasma was confirmed. This method was successfully applied to quantify the plasma concentrations of 24S‐hydroxycholesterol in male and female volunteers.     

Synthesis of optically inactive cellulose via cationic ring-opening polymerization

Cellulose, which comprises D-glucose and L-glucose (D,L-cellulose), was synthesized from D-glucose (1D) and L-glucose (1L) via cationic ring-opening polymerization. Specifically, the ring-opening copolymerization of 3-O-benzyl-2,6-di-O-pivaloyl-β-D-glucopyranoside (2D) and 3-O-benzyl-2,6-di-O-pivaloyl-β-D-glucopyranoside (2L), synthesized from compounds 1D and 1L, respectively, in a 1:1 ratio, afforded 3-O-benzyl-2,6-di-O-β-D,L-glucopyranan (3DL) with a degree of polymerization (DPn) of 28.5 (Mw/Mn?=?1.90) in quantitative yield. The deprotection of compound 3DL and subsequent acetylation proceeded smoothly to afford acetylated compound 4DL with a DPn of 18.6 (Mw/Mn?=?2.08). The specific rotation of acetylated compound 4DL was?+?0.01°, suggesting that acetylated compound 4DL was optically inactive cellulose triacetate. Furthermore, before acetylation, compound 4DL was an optically inactive cellulose comprising an almost racemic mixture of D-glucose and L-glucose. Compound 4DL was an amorphous polymer. This is the first reported synthesis of optically inactive D,L-cellulose.

     

Hierarchical porous cellulose/activated carbon composite monolith for efficient adsorption of dyes

Cheap and efficient adsorbents to remove contaminants of toxic dye molecules from wastewater are strongly in demand for environmental reasons. This study provides a novel design of a monolithic adsorbent from abundant materials via a facile synthetic procedure, which can greatly reduce the problems of the tedious separation of adsorbents from treated wastes. A hierarchically porous cellulose/activated carbon (cellulose/AC) composite monolith was prepared by thermally-induced phase separation of cellulose acetate in the presence of AC, using a mixture of DMF and 1-hexanol, followed by alkaline hydrolysis. The composite monolith had alarge specific surface area with mesopore distribution. It not only showed high uptake capacity towards methylene blue (MB) or rhodamine B (RhB) but could also simultaneously adsorb MB and RhB from their mixture, in which the adsorption of one dye was not influenced by the other one. Remarkable effects of solution pH, initial concentration of dye (C ₀), contact time, adsorbent dosage and temperature on the adsorption of MB and RhB onto the composite monolith were demonstrated. The binding data for MB and RhB adsorption on the composite monolith fitted the Freundlich model well, suggesting a heterogeneous surface of the composite monolith. The monolith could retain around 90% of its adsorption capacity after 8 times reuse. These data demonstrate that the cellulose/AC composite monolith has a large potential as a promising adsorbent of low cost and convenient separation for dye in wastewater.     

Preparation of phthalocyanine-bound myristoyl celluloses for photocurrent generation system

The influences of two structural modifications on the photocurrent generation performance of the Langmuir–Blodgett (LB) film of the 6-O-phthalocyaninyl cellulose derivative were investigated. These structural modifications were the substituent groups at the O-2 and O-3 positions, and the central metal of the phthalocyanine moiety. Specifically, 6-O-Zn/phthalocyaninyl- (8a) and Pd/phthalocyaninyl (8b) -2,3-di-O-myristoylcelluloses were prepared instead of 6-O-Zn/phthalocyaninyl-2,3-di-O-myristylcellulose (2). The LB monolayer film of compound 8a on an indium thin oxide electrode showed higher photocurrent generation performance than that of compound 2. This suggested that myristoyl groups (C-14 acyl groups) were more beneficial to photocurrent generation than myristyl groups (C-14 alkyl groups), as the substituent at the O-2 and O-3 positions. The LB monolayer film of compound 8b showed photocurrent generation from 500 to 700 nm, although a blue-shift in the Q-band maximum was observed. The photocurrent generation performance of compound 8b was significantly higher than that of compound 8a. This indicated that Pd was more beneficial to photocurrent generation than Zn. The film of compound 8b prepared by the horizontal lifting method showed better photocurrent generation performance than that prepared by the vertical dipping method. Consequently, compound 8b is a complementary material to the porphyrin-appended cellulose derivative (1) for photocurrent generation system.     

A non-negative matrix factorization model based on the zero-inflated Tweedie distribution

Non-negative matrix factorization (NMF) is a technique of multivariate analysis used to approximate a given matrix containing non-negative data using two non-negative factor matrices that has been applied to a number of fields. However, when a matrix containing non-negative data has many zeroes, NMF encounters an approximation difficulty. This zero-inflated situation occurs often when a data matrix is given as count data, and becomes more challenging with matrices of increasing size. To solve this problem, we propose a new NMF model for zero-inflated non-negative matrices. Our model is based on the zero-inflated Tweedie distribution. The Tweedie distribution is a generalization of the normal, the Poisson, and the gamma distributions, and differs from each of the other distributions in the degree of robustness of its estimated parameters. In this paper, we show through numerical examples that the proposed model is superior to the basic NMF model in terms of approximation of zero-inflated data. Furthermore, we show the differences between the estimated basis vectors found using the basic and the proposed NMF models for \(\beta \) divergence by applying it to real purchasing data.     

High-Pressure Synthesis of Fully Occupied Tetragonal and Cubic Tungsten Bronze Oxides

A high-pressure reaction yielded the fully occupied tetragonal tungsten bronze K₃W₅O₁₅ (K_0.6WO₃). The terminal phase shows an unusual transport property featuring slightly negative temperature-dependence in resistivity (dρ/dT<0) and a large Wilson ratio of R_W=3.2. Such anomalous metallic behavior possibly arises from the low-dimensional electronic structure with a van Hove singularity at the Fermi level and/or from enhanced magnetic fluctuations by geometrical frustration of the tungsten sublattice. The asymmetric nature of the tetragonal tungsten bronze K_xWO₃-K_0.6−yBa_yWO₃ phase diagram implies that superconductivity for x≤0.45 originates from the lattice instability because of potassium deficiency. A cubic perovskite KWO₃ phase was also identified as a line phase—in marked contrast to Na_xWO₃ and Li_xWO₃ with varying quantities of x (<1). This study presents a versatile method by which the solubility limit of tungsten bronze oxides can be extended.     

Discovery of Hexagonal Structured Pd–B Nanocrystals

We report on hexagonal close-packed (hcp) palladium (Pd)–boron (B) nanocrystals (NCs) by heavy B doping into face-centered cubic (fcc) Pd NCs. Scanning transmission electron microscopy–electron energy loss spectroscopy and synchrotron powder X-ray diffraction measurements demonstrated that the B atoms are homogeneously distributed inside the hcp Pd lattice. The large paramagnetic susceptibility of Pd is significantly suppressed in Pd–B NCs in good agreement with the reduction of density of states at Fermi energy suggested by X-ray absorption near-edge structure and theoretical calculations.     

Effect of Acid Treatment of Montmorillonite on “Support‐Activator” Performance to Support Metallocene for Propylene Polymerization Catalyst

This work is focused on montmorillonite (MMT)‐based “support‐activators” (S‐As) for the metallocene‐catalyzed propylene polymerization. This catalyst was previously industrialized; however, for further technological advances, the activation mechanism is investigated. The chemical and morphological requirements of the S‐A are surveyed using both commercially available raw clay minerals (non‐acid‐treated) and acid‐treated clay minerals. The S‐A possessing strong‐acid sites (pK a < ?8.2) gives a highly active catalyst. Acid treatment of MMT induces morphological changes as well as the formation of strong acid sites. Based on pore size distribution analysis and atomic force microscopy observations, it is concluded that the strong acid sites are located in the small pores around the edge of the clay mineral (not in the interlayer), where the structure is disordered by the acid treatment.

     

Hyperpolarized 13C Magnetic Resonance Imaging of Fumarate Metabolism by Parahydrogen-induced Polarization: A Proof-of-Concept in vivo Study

Hyperpolarized [1-¹³C]fumarate is a promising magnetic resonance imaging (MRI) biomarker for cellular necrosis, which plays an important role in various disease and cancerous pathological processes. To demonstrate the feasibility of MRI of [1-¹³C]fumarate metabolism using parahydrogen-induced polarization (PHIP), a low-cost alternative to dissolution dynamic nuclear polarization (dDNP), a cost-effective and high-yield synthetic pathway of hydrogenation precursor [1-¹³C]acetylenedicarboxylate (ADC) was developed. The trans-selectivity of the hydrogenation reaction of ADC using a ruthenium-based catalyst was elucidated employing density functional theory (DFT) simulations. A simple PHIP set-up was used to generate hyperpolarized [1-¹³C]fumarate at sufficient ¹³C polarization for ex vivo detection of hyperpolarized ¹³C malate metabolized from fumarate in murine liver tissue homogenates, and in vivo ¹³C MR spectroscopy and imaging in a murine model of acetaminophen-induced hepatitis.